QTERM-IV/P40 User's Manual
53
Beijer Electronics Fax 801-466-8792 Web www.beijerelectronicsinc.com Phone 801-466-8770
Set Cursor mode
]
b#
1.2
#= @ block off, underline off (no cursor)
A block off, underline on
B block on, underline off
C block on, underline on
Set Shift Mode
]
c#
1.2
#= @ function mode, shift indicator enabled
A lock mode, shift indicator enabled
B function mode, shift indicator disabled
C lock mode, shift indicator disabled
Control dig1 and dig2
]
d#
1.2
see section 2.2.40 for values
Set Buzzer Duration
]
e#
1.2
see Table 1-2
Set Key Click Duration
]
f#
1.2
see Table 1-2
Set Key Repeat Rate
]
g#
1.2
see Table 1-2
Set LED Blink Rate
]
h#
1.2
see Table 1-2
Save Parameters to EEPROM
]
i
6.0
see note in section 2.2.45
Auxiliary Port Control
]
j#..
1.2
1.2
*
#= @ disable receive from Auxiliary Port
A enable receive from Auxiliary Port
B send string, *= about 8 ms per character
Transmit Buffer Flush
]
k
1.2
XON/XOFF Mode
]
l#
1.2
#= @ disable XON/XOFF operation
A enable XON/XOFF operation
User Area Read/Write
]
m#
timing depends on baud rate
# = @ read user; returns byte count and data bytes; see
section 2.2.49 for details
A write user data; follow “A” with byte count and
data bytes; see section 2.2.49 for details
Get Free User Area
]
n
2.2
see Table 1-2
User Area Page Control
]
o
1.2
Macro String Execution
]
p
timing depends on macro string
Query Multidrop Buffer
]
q
timing depends on number of characters in buffer
Command
String
Timing
(ms)
Notes & Parameters
