BEIER-Electronic SFR-1-HL Скачать руководство пользователя страница 22

Страница: 22 / 110

Double Sound Speed Controller SFR-1-HL

BEIER-Electronic

01.04.2021

Reverse warning

The reverse warning sound is played when the vehicle drives backward. This could

be e.g. the warning beeping of a truck. The reverse warning sound is mixed/added to

the engine sound.

Brake sound

The brake noise is played when the driving speed is reduced.

Cornering squeak

The sound for the cornering squeak is played, as soon as the model turns. The

threshold level is configured in the Sound-Teacher (Configuration



Engine sound



Engine sound).

Indicator noises

The indicator sound is played when the vehicle signals. The indicator sound is

mixed/added to the engine sound.

Engine noise / Gears FG1 - FG5

The engine sound is always played in an endless loop as long as the model moves.

The playing speed depends on the driving speed of the vehicle. The SFR-1-HL

recognizes how fast the vehicle moves, and plays the engine noise in the

corresponding speed. The relation between driving and sound speed can be set in

the driving sound diagram (see page 88).

You can also set with the Sound-Teacher how many different sounds should be used

for driving forward and backward. This could be for instance sounds for different

gears for a truck or you can choose different driving sounds for each driving speed

(e.g. slow, normal and fast).

Please keep in mind; the “gears” are just generated by the SFR-1-HL and not

through a mechanic gearshift. Yet it is not possible to activate the different sounds

through an engine control or a real gearshift.

For each driving sound FG1 – FG5 you can use three different settings (normal, slow

down and speed up). The latter options are just additional to generate a more

authentic sound but in most cases the “normal” sound is sufficient.

If you use the sound slot “slow down” and the model brakes, the driving sound

switches automatically from “FGx normal” to “FGx slow down”. The same happens

when the model accelerates and the sound slot “speed up” is used.

To divide the entire speed range into sections for up to five engine sounds/gears you

can use the engine sound diagram (see page 88).

Содержание SFR-1-HL















































































































Результаты поиска

Содержание SFR-1-HL

Отзывы:

Похожие инструкции для SFR-1-HL

Бренды по названию

Популярные бренды

BEIER-Electronic SFR-1-HL, Руководство по эксплуатации

Результаты поиска

Содержание SFR-1-HL

Отзывы:

Похожие инструкции для SFR-1-HL

Бренды по названию

Популярные бренды