2
ULTRAPAR UP1000
SAFETY INSTRUCTIONS
CAUTION:
To reduce the risk of electrical shock, disconnect the spotlight from the mains before cleaning or servicing the
unit. No user serviceable parts inside; refer servicing to qualified personnel.
WARNING:
To reduce the risk of fire or electrical shock, do not expose the spotlight to rain or moisture.
DETAILED SAFETY INSTRUCTIONS:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this device near water.
6) Clean only with a dry cloth.
7) Install in accordance with the manufacturers instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat. Do not mount the spotlight on or near easily flammable surfaces.
9) Do not under any circumstances remove the power plug safety mechanism.
10) Protect the power cord from being walked on or pinched particularly at plugs, extension cords, and the point at which they exit the
unit.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the device. When a cart is used,
use caution when moving the cart/device combination to avoid injury from stumbling over it.
13) Unplug this device during lightning storms or when not used for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the unit has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15) The spotlight has not been designed for outdoor use, and should be used in dry rooms only, with a humidity below 90%. Dont use
the spotlight near water (e.g. bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.).
16)
Be sure to install a lens and attach the protective mesh before you attempt to operate the spotlight. The locking bracket of the
color frame must be locked before the spotlight is switched on.
17)
The spotlight must always be mounted and secured using the corresponding retention holes in the mounting bracket. When using
a stand or hook clamp, be sure to attach the spotlight with a tightened steel screw (M12), washer and locknut. Additionally, the
spotlight must be secured on the truss or stand with a safety steel cable.
18) The spotlight must be mounted at a minimum distance of 2 m from the illuminated object, as the light beam can heat any such
object to a temperature of 90°C. Avoid using easily flammable materials in the light beam.
19) The spotlight should be situated so that its location or position does not interfere with its proper ventilation. For example, the
spotlight should not be situated on a bed, sofa rug, or similar surface; the same applies to truss-mounted operation: proper ventilation
must always be ensured.
All manuals and user guides at all-guides.com
