4
ULTRAPAR UP1000
2. LAMP
1.
INTRODUCTION
Congratulations! With the BEHRINGER ULTRAPAR UP1000 you purchased a first-class PAR
spotlight mounted in a compact, extremely robust and durable casing and featuring a comprehensive
range of accessories.
1.1
Before you begin
Your ULTRAPAR was carefully packed in the factory and the packaging is designed to protect the
unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging
and its contents for any signs of physical damage, which may have occurred during transit.
+
If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer
and the shipping company immediately, otherwise claims for damage or replacement
may not be granted. Shipping claims must be made by the consignee.
1.2
Mains connection
Prior to the initial operation of the spotlight UP1000, a mains plug must be attached to the power
cord. Please use a commercially available shockproof plug with a minimum power rating of 2.5 A
(220 / 240 V). The wires of the connecting cable are clearly marked according to their function.
The spotlight can be operated from a power supply of max. 120 V / 5 A or 240 V / 2.5 A AC. The
mains frequency should be 50 / 60 Hz.
+
Please note that your ULTRAPAR spotlight must be grounded properly. For your own
safety, you should not remove or defeat the ground connection of the spotlight or
power cord.
+
Make sure that the spotlight will be installed by qualified personnel only.
2.
LAMP
The halogen lamp needed for using the UP1000 is not included with the shipment. To start using
your ULTRAPAR spotlight, use the BEHRINGER 575H (575 Watts at 110 V / 230 V) or any other
compatible lamp with the G9.5 socket. Make sure that the lamp you use is compatible with local
voltage.
+
If the lamp is operated with a voltage surpassing its nominal operating voltage, it can
be damaged/destroyed or its service life reduced considerably.
All manuals and user guides at all-guides.com
