7
ULTRAPAR UP1000
7. SPECIFICATIONS
5.
CLEANING THE REFLECTOR
s
Disconnect the spotlight from the mains and remove the lamp casing as described in chapter 2.1.
s
Remove the color frame
(chapter 4), the protective mesh and lens
(chapter 3.1), so that
the reflector is easily accessible.
s
Cleaning the reflector: Use oil-free compressed air or a soft, lint-free cotton cloth. Tenacious
stains can be removed by adding some mild soap water, however, dont forget to remove all
soap water remnants as well!
s
Remount the spotlight (see chapters 2.1 and 3.2).
+
Never clean the reflector with commercial window cleaners, as the chemical
substances contained in these agents can damage the reflector insert!
+
Dont use paper towels or other material with a rough surface to wipe the reflector
clean, so as to avoid scratches damaging the reflector surface.
+
Avoid touching the reflector with bare hands. Oily finger marks can bake onto the
glass surface and substantially lower optical quality.
6.
SUSPENDED INSTALLATION
Use the mounting bracket
to attach your spotlight to a stand or truss. Always use M12 steel
screws to fasten the spotlight. Your UP1000 must be secured with an additional safety steel cable
. Use the steel cable fixed to the spotlight casing (eyelet
).
Once the spotlight has been adjusted, it must be secured in place with the locking screw
.
7.
SPECIFICATIONS
Power
575 W max. (120 V / 240 V)
Max. room temperature
Ta = 45°C
Max. temperature of exterior surfaces Tmax = 175°C
Dimensions (Height x Diameter)
approx. 11 3/4" (300 mm) x 9 1/4" (237 mm)
Weight
approx. 3.8 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without further notice. Specifications and appearance may differ from those listed or shown.
All manuals and user guides at all-guides.com
