Behringer Ultra-dyne Pro DSP9024 страница 50 Скачать руководство пользователя

Страница: 50 / 50

The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted

in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the

express written permission of BEHRINGER GmbH.

BEHRINGER INTERNATIONAL GmbH, Hanns-Martin-Schleyer-Str. 36-38, D-47877 Willich-Münchheide II

Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30

this modification/adaptation shall not be considered a defect in

materials or workmanship. The warranty does not cover any

such modification/adaptation, irrespective of whether it was

carried out properly or not. Under the terms of this warranty,

BEHRINGER INTERNATIONAL shall not be held responsible for

any cost resulting from such a modification/adaptation.
3. Free inspections, maintenance/repair work and replacement

of parts are expressly excluded from this warranty, in particular

if caused by inappropriate use. Likewise, the warranty does not

cover defects of expendable parts caused by normal wear of

the product. Expendable parts are typically faders, potentiom-

eters, switches and similar components.
4. Damages/defects caused by the following conditions are not

covered by this warranty:

misuse, neglect or failure to operate the unit in compliance

with the instructions given in the user or service manuals.

connection or operation of the unit in any way that does not

comply with the technical or safety regulations applicable in

the country where the product is used.

damages/defects that are caused by force majeure or by

any other condition beyond the control of BEHRINGER

INTERNATIONAL.

5. Any repair carried out by unauthorized personnel will void the

warranty.
6. Products which do not meet the terms of this warranty will be

repaired exclusively at the buyers expense. BEHRINGER

INTERNATIONAL will inform the buyer of any such circumstance.

If the buyer fails to submit a written repair order within 4 weeks

after notification, BEHRINGER INTERNATIONAL will return the

unit C.O.D. with a separate invoice for freight and packing. Such

cost will also be invoiced separately when the buyer has sent in

a written repair order.

§ 5 WARRANTY TRANSFERABILITY

This warranty is extended exclusively to the original buyer (cus-

tomer of retail dealer) and is not transferable to anyone who

may subsequently purchase this product. No other person (re-

tail dealer, etc.) shall be entitled to give any warranty promise on

behalf of BEHRINGER INTERNATIONAL.

§ 6 CLAIM FOR DAMAGES

Failure of BEHRINGER INTERNATIONAL to provide proper war-

ranty service shall not entitle the buyer to claim (consequential)

damages. In no event shall the liability of BEHRINGER INTERNA-

TIONAL exceed the invoiced value of the product.

§ 7 OTHER WARRANTY RIGHTS

This warranty does not exclude or limit the buyers statutory

rights provided by national law, in particular, any such rights

against the seller that arise from a legally effective purchase

contract.

§ 1 WARRANTY CARD

To be protected by this warranty, the buyer must complete and

return the enclosed warranty card (signed/stamped by retail

dealer) within 14 days of the date of purchase to BEHRINGER

INTERNATIONAL (address see § 3). Failure to return the card in

due time (date as per postmark) will void any extended warranty

claims.

§ 2 WARRANTY

1. BEHRINGER INTERNATIONAL warrants the mechanical and

electronic components of this product to be free of defects in

material and workmanship for a period of one (1) year from the

original date of purchase, in accordance with the warranty regu-

lations described below. If any defects occur within the speci-

fied warranty period that are not caused by normal wear or

inappropriate use, BEHRINGER INTERNATIONAL shall, at its sole

discretion, either repair or replace the product.
2. If the warranty claim proves to be justified, the product will be

returned freight prepaid by BEHRINGER INTERNATIONAL within

Germany. Outside of Germany, the product will be returned at

the buyers expense.
3. Warranty claims other than those indicated above are ex-

pressly excluded.

§ 3 RETURN AUTHORIZATION NUMBER

1. To obtain warranty service, the buyer must call BEHRINGER

INTERNATIONAL during normal business hours BEFORE return-

ing the product (Tel.: +49 (0) 21 54 / 92 06 66). All inquiries must

be accompanied by a description of the problem. BEHRINGER

INTERNATIONAL will then issue a return authorization number.
2. The product must be returned in its original shipping carton,

together with the return authorization number, to the following

address:

BEHRINGER INTERNATIONAL GmbH

Service Department

Hanns-Martin-Schleyer-Str. 36-38

D - 47877 Willich-Münchheide

3. Shipments without freight prepaid will not be accepted.

§ 4 WARRANTY REGULATIONS

1. Warranty services will be furnished only if the product is

accompanied by an original retail dealers invoice. Any product

deemed eligible for repair or replacement by BEHRINGER INTER-

NATIONAL under the terms of this warranty will be repaired or

replaced within 30 days of receipt of the product at BEHRINGER

INTERNATIONAL.
2. If the product needs to be modified or adapted in order to

comply with applicable technical or safety standards on a na-

tional or local level, in any country which is not the country for

which the product was originally developed and manufactured,

7. WARRANTY

Содержание Ultra-dyne Pro DSP9024



















































Результаты поиска

Содержание Ultra-dyne Pro DSP9024

Отзывы:

Похожие инструкции для Ultra-dyne Pro DSP9024

Бренды по названию

Популярные бренды

Behringer Ultra-dyne Pro DSP9024, Руководство пользователя

Результаты поиска

Содержание Ultra-dyne Pro DSP9024

Отзывы:

Похожие инструкции для Ultra-dyne Pro DSP9024

Бренды по названию

Популярные бренды