Behnke 99-1025, Руководство пользователя

Страница: 88 / 148

88
fire mode
Behnke AT6 manual
15. FIRE MODE
The SL6+ system can be used as a fire depart-
ment intercom system. Depending on the
configuration, up to 6 bus units
can be used as a fire intercom system. Fire
mode is started by activating an input on the
main intercom station.
Configuration
To configure the dialling unit in fire mode, use
parameter *73* (cf. parameter list).
▸ Set input 1 to fire mode: *73*14#
▸ Set input 2 to fire mode: *73*24# (default)
▸ Using SL-Pro software, select which other bus
units to include in the fire mode.
Operation
Activation of fire mode (when the input defined
above is activated) will result in the following:
A siren signal sounds in the speaker of the
dialling unit. Press the reset button to stop the
siren sound. The voice announcement for the
fire mode (parameter *57*) is played. When the
fire mode is activated, the stations can only be
operated as intercom system and no emergency
calls are possible.
Voice communication
▸ Bus device in the cabin: Microphone and
speaker are both active.
▸ Other stations: The emergency button
becomes a push-to-talk button (press to talk,
release to listen).
▸ A short beep is emitted when the button is
pressed and released.
▸ In fire mode, you can use the machine room
telephone to participate in the conversation
via the dialling unit.
▸ The yellow pictogram lights up when the fire
mode is activated.
▸ The green pictogram lights up when the
speaking mode is activated and turns off
when listening.
▸ Fire mode is terminated by deactivating the
input (1 or 2) on the main intercom station
configured for fire mode.