Beem Leopard G5, Руководство пользователя

Страница: 28 / 56

26
Leopard G5 EN
BEEM - Elements of Lifestyle
Troubleshooting
The following table will help you locate and eliminate minor faults:
Fault Possible cause Remedy
The appliance does not
function after switching on.
Plug not inserted into socket. Insert plug.
Automatic circuit breaker in
electrical distribution board
tripped.
Switch on the automatic
circuit breaker again.
The internal safety switch has
switched off the appliance as
a result of overheating.
Allow the appliance to
cool down.
Both switches A (7) and B (8)
have not been moved to the
"ON" position.
Move both switches to
the "ON" position.
The automatic circuit
breaker in the electrical
distribution board trips.
Too many appliances connect-
ed to the same power circuit.
Reduce the number of
appliances on the power
circuit.
No fault detected.
Contact customer
service.
Motor runs extremely
slowly or stops.
Pressure too strong. Exert less pressure.
The mincer attachment is
blocked.
Eliminate blockage as
described in the section
Eliminating blockages
(page 22) .
NOTE!
If you cannot resolve the problem with the steps described above, please contact ►
customer service.