22
Leopard G5
EN
BEEM - Elements of Lifestyle
Operation and use
Notes
Using as mincer
If you wish to make very fine mince,
■
you can feed the meat through several
times (initially use a perforated disc
with large holes and then one with
smaller holes).
You can chop the ingredients (e. g.,
■
onions) together with the mince.
Inedible parts such as bones, gristle
■
or tendons must be removed before
mincing.
Dice the meat first so that it fits into the
■
feed shaft.
Making sausages
Soak the sausage skin in lukewarm
■
water for 10 minutes. Push the wet
sausage skin over the sausage filling
shaft. Sausage skins can be obtained
at the butchers.
Season the mince and put it into the
■
funnel.
If the sausage skin is sticky, dampen it
■
again with a little lukewarm water.
Numerous recipes are available in the
■
Internet. For example, it is possible to
individually season each one with dif-
ferent spices until the desired flavour
has been found.
Using the Kebbe attachment
Kebbe (Kibbeh Mischwiye) is filled meat
rolls. A hollow roll is made with the Kebbe
attachment that can be cut to the desired
length and filled with various different in
-
gredients (e. g., meat, vegetables). The
Kebbe portions are subsequently fried.
Switching the appliance on/off
Move switch B (8) followed by switch
A (7) to the "ON" position to switch on
the appliance.
Move switch A (7) to position "0" (mid-
dle position) to switch off the appli-
ance.
Using the appliance
Assemble the attachment as de-
scribed in the section
Assembling
the attachment (page 20)
.
Insert the plug into the mains socket.
Switch on the appliance as described
in the section
Switching the appli-
ance on/off (page 22)
.
Put a suitable container under the
outlet.
Cut the ingredients into pieces to fit
into the feed shaft.
Add the ingredients into the feed shaft
Press the ingredients downwards us-
ing the pusher (2) until the feed shaft
is empty.
Eliminating blockages
Switch off the appliance as described
in the section
Switching the appli-
ance on/off (page 22)
.
Move switch B (8) to position "R".
Move switch A (7) to position "R" and
hold down for max. 10 seconds. When
you release the button, it springs back
to position "0".
Pull the plug out of the mains socket.
Содержание Leopard G5
