Beem CDC-503, Руководство по эксплуатации

Страница: 35 / 104

35 EN
Brewing Coffee with a Preset Time
You have the option of setting a preset time so that the coffee is freshly prepared at the time
you want.
To make coffee with a preset time, the clock needs to be set (see the “Handling and
Operation” chapter – “Time”).
1. Perform steps 1 – 8 from the “Brewing Coffee” section.
2. Turn the rotary knob (
3
) to the position
Program.
The hour display fl ashes.
3. Use the and buttons (
5
) to set the hours.
4. Press the button (
4
) to switch to the minutes display. The minutes display fl ashes.
5. Use the and buttons to set the minutes.
6. Press the button to con fi rm the set start time.
7. Press the button again to activate the preset time. On the display (
2
), PROG is shown
constantly and the preset time is active.
Please Note:
As long as the preset time is activated, you cannot make any further settings
or use other functions.
8. Press the button again to deactivate the preset time. The
PROG
display goes out and
the preset time is no longer active.
The preset time remains stored until a new desired time is set. To reactivate the desired
time which is stored, turn the rotary knob to the
Program position and wait until the
hours stop fl ashing. Then press the button to activate the preset time.
Boiling Water
You can individually set the temperature to which the water is heated in the Water program.
You can choose a temperature of between 32 and 100 °C.
1. Fill the water tank (
13
) with water (see the “Preparation” chapter – “Filling the Water
Tank”).
Please Note:
The carafe has a useful volume of no more than 750 ml! It must not be
over fi lled!
2. Place the carafe (
8
) without the fi lter cone (
12
) in the main device (
13
) on the scale (
10
).
3. Turn the rotary knob (
3
) to the position
Water.
An indication of the temperature appears
on the display (
2
).
4. Use the and buttons (
5
) to set the temperature you want. The selected tempera-
ture is shown on the display and is automatically active.