Maintenance
Inlet & Outlet Valve Clearance
Model Number
Inlet Valve Clearance
(cold)
Outlet Valve Clearance
(cold)
5000
0.06~0.08 mm
0.08~0.10 mm
Allow the engine to cool before adjusting inlet or
outlet valve clearance. Otherwise, it may be
damaged. This operation must be performed by
professional technical staff, please contact with
authorized sales & service distributor/ dealer for
further details.
Caution
!
Engine – Adjusting Inlet & Outlet Clearance
26
Outlet
Inlet
1.
Disassemble Air-fuel Mixer will void your
warranty. Please contact authorized sales
& service distributor/ dealer if you need
change Air-fuel Mixer.
2.
The Air-fuel Mixer is not adjustable.
3.
Tampering with the governor can damage
your generator and your electrical devices,
and will void your warranty.
1.
DO NOT spray engine with water, water can contaminate the fuel system.
2.
Use a damp cloth to clean exterior surfaces of the engine.
3.
Use a soft bristle brush to remove dirt and oil.
4.
Use an air compressor (25 PSI) to clear dirt and debris from the engine.
5.
Inspect all air vents and cooling slots to ensure that they are clean and unobstructed.
Warning
!
Caution
!
Engine – Air-fuel Mixer
1.
Make certain that the generator is kept clean and stored properly.
2.
Only operate the unit on a flat, level surface in a clean, dry operating environment.
3.
DO NOT expose the unit to extreme conditions, excessive dust, dirt, moisture or corrosive
vapors.
Generator (Alternator)
Clean the Generator Set
Содержание BMG5
Страница 36: ...Note 35...
