USER MANUAL
– MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP
– PLEASE CALL US FOR ADVICE!
Revision 1.0 www.bedjet.com
P a g e | 11
7)
Remove or add Height Extending Links to
the Mattress Mount to adjust height so that
bottom of the Air Nozzle rests comfortably on
the top of the mattress. When finished, the
Air Nozzle should project onto the mattress
surface as shown. If additional Height
Extending Links are needed for unusually
thick mattresses, contact BedJet support at
send you more links complimentary and free
of charge! First please do double check you
have the correct installation per step #6.
8)
Place BedJet on the floor directly beneath
the Mattress Mount. Assemble the Air Hose
onto air output port of BedJet.
9)
Please review safety warnings on page
23 of manual. Do not plug into power
strips or extension cords.
Plug your
BedJet power cord directly into an AC outlet
and press Power button. Power button
should light up and BedJet will make an
audible beep indicating READY. Complete
Steps 9 & 10 before positioning your BedJet
under the bed.
HELP! POWER CORD ISN’T LONG ENOUGH?
The power cord length of the BedJet is the maximum allowed under our Underwriters
Laboratories electric appliance certification and should reach most outlets located near
the head of the bed. If cord cannot conveniently reach a power outlet, it may be helpful
to move BedJet closer to the outlet. We also offer a low cost Air Hose extension, giving
8-feet total Air Hose length. The Air Hose extension will allow you to place the BedJet
nearly anywhere under the bed or around the bed to be closer to a preferred power
outlet. You can order the hose extension at
