USER MANUAL
– MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP
– PLEASE CALL US FOR ADVICE!
Revision 1.0 www.bedjet.com
P a g e | 12
10)
Insert supplied AA batteries into Remote Control. Battery installation
is accessed by pushing and sliding the entire back cover off the
remote per below:
Remote control screen will light up. The remote control automatically
wakes up when picked up
.
Follow and complete all initial setup
instructions on remote control screen.
Download of the BedJet
Bluetooth App to any iOS or Android smart device (phone or tablet)
will be requested to update firmware. Updating firmware is very
important. Before BedJet is placed under the bed, familiarize
yourself with turning on and off the various operating modes (Heat,
Cool, etc) while the Status and Control Panel of the BedJet is easily
visible.
11)
The best location for the BedJet is under your
bed. BedJet requires 6.25 inches clearance to
fit. BedJet is designed to be an extension of
your bed and certified to the same
Underwriters
Laboratories
(UL)
safety
standards as electrified hospital beds. If the
BedJet cannot be placed under the bed, lay
the BedJet on its side and tuck against the foot
of the bed or side of the bed as shown.
When installing under the bed, adjust the
location of the BedJet air output port to be as
close as possible to the Air Nozzle. Compress
length in the Air Hose so that only the shortest
length of Air Hose needed is used. Keep sharp
bends in Air Hose to a minimum for maximum
flow.
