USER MANUAL
– MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP
– PLEASE CALL US FOR ADVICE!
Revision 1.0 www.bedjet.com
P a g e | 10
5)
Slide the Mattress Mount base under your mattress
in the location identified in Step 3 or Step 4. Slide
the Mattress Mount base as deeply as possibly
under the mattress until the Mattress Mount is flush
against the mattress. The Mattress Mount will be
used to secure the Air Hose and Air Nozzle
assembly against the side of the bed.
6)
Assemble Air Nozzle onto the end of the Air Hose. Stretch and compress the Air Hose;
note it can be expanded, contracted, and bent to retain any desired shape. Push the
fabric section
of the Air Hose into the Mattress Mount Hose Grip. The Hose Grip will
stretch open to accept the Air Hose, holding it firmly. See photo below for correct
installation.
CORRECT
INCORRECT
Hose Grip or “C-clamp” grabs onto
the fabric section of the Air Hose.
You can also raise the hose up to
1.5” higher than shown, this will
create small a gap between C-
Clamp and plastic cuff on end of
hose.
Hose Grip or “C-clamp” is grabbing
onto the plastic cuff at the end of the
Air Hose. This is incorrect and
unstable and will cause you to need
more height extension links than
normal.
