USER MANUAL
– MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP
– PLEASE CALL US FOR ADVICE!
Revision 1.0 www.bedjet.com
P a g e | 15
YOUR BEDJET IS NOW READY TO ENJOY!!
HELP! NOT SURE IF BEDJET CAN FIT UNDER BED?
Some bedframes with low hanging side rails may look like they cannot fit the BedJet
underneath, but this is just the side rail and the under-mattress area may still have 6.25
inches height clearance. In these cases, the bed frame may be lifted up and the BedJet
placed underneath. As long as the mattress or frame does not rest on the BedJet and
the 3” hose can clear the low side rail, the installation is acceptable.
HELP! WILL IT WORK WITH MY ADJUSTABLE BED FRAME?
The BedJet is power adjustable bed frame approved. It will work fine underneath
adjustable bed frames, just make sure that the BedJet and Air Hose are installed in a
location under the frame where the full range of frame articulation will not crush either
component.
Maintenance
The only maintenance required for the BedJet is
periodic inspection and cleaning of the lifetime
washable air intake filter. The lifetime washable
intake filter is designed to keep dust, lint, pet hair,
etc. out of the BedJet air flow.
Inspect and clean the filter every 3 months or
when visually dirty or more frequently if
shedding pets are near or around BedJet.
The filter is located behind the BedJet intake air
grill. Access filter by pushing intake air grill off the
unit as shown on both sides. Remove the foam
filter and clean under household running water.
Reinstall filter when dry and push in the air intake
grill until it snaps back in place. If your filter ever gets damaged during cleaning, you can
purchase replacements at bedjet.com.
