Beckmann EMS 133 E Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 38

Beckmann EMS 133 E Скачать руководство пользователя страница 37

Product Description & Operating Manual EMS 13x / 23x / 33x

Beckmann GmbH © 2001

Page 37

6.6 Charging terminal with banknote validator

The charging terminal allows your customers to charge their cards independently.

•

Banknote validator (BNP) for 5, 10, 20, 50 € notes, foreign currencies on request. The BNP
can be programmed for other currencies, such as the Euro.

•

Three separate rebate levels for charging are possible, the higher the purchase, the higher the
rebate.

6.7 Cleaning set for the Chip card contact unit

We offer a special cleaning set for the chip card contact unit which allows you to easily and

thoroughly remove dirt and grime from the contact unit.

6.8 EMSCASH Box

The EMSCASH box is for hooking up EMS 3xx timers to a PC with EMSCASH software
installed. Communication between EMSCASH and the EMSCASH box occurs over your PC’s
serial port.

EMSCASH software and the EMSCASH box provide you with a modern and fully modular
tanning studio control center with integrated register, customer, article, personnel and turnover
management. EMSCASH’s flexibility means that it can be efficiently used in tanning studios
with self-service areas. Using individual timers and EMSCASH in conjunction provides the
security and convenience of self-service without having to sacrifice the all-important register and
database functions of PC-based studio control. EMSCASH closes the gap between self-service
and customer service in the modern tanning studio.

7 Currency changeover

The changeover from one to another currency (eg. DM to Euro) consists of two phases.

7.1 EMP conversion

In general, the EMP must be disconnected from a power source when converting, otherwise the
saved EMP Euro data can not be accepted. Provided your EMP is already pre-programmed for
the Euro, simply turn over the last DIP-switch under the cover (NRI only). See Illustration 7. The
device now accepts only Euro coins. Turn the blocking switch for 10 and 20 Cent coins on if
these coins should not be accepted.

7.2 Timer conversion

Turn the timer off, keep the two outer keys pressed and turn the timer back on. The following

menu appears.

CURRENCY ?

(old)

↓

INFO

↓

EURO

↓

Press the white key to read information over the Euro, or choose the currency. The current

currency settings can be seen next to the minimum amount in the timer’s free status display.

Please note that the price and evaluation settings must be reset after conversion to the Euro,

because these parameter values are

not

automatically converted. It is recommendable to delete all

balances to ensure that new Euro amounts are not added to old DM amounts.

«
...
35
36
37
38
»

Содержание EMS 133 E







































Отзывы:

Нет отзывов