Product Description & Operating Manual EMS 13x / 23x / 33x
Page 12
Beckmann GmbH © 2003
1.3 Resetting the EMS Timers
To delete the timer data or set the default values, press and hold all three keys and turn the power
on. You will see the following display:
ERASE MEMORY ?
CrdNr Par. No
•
You may delete the card numbers by pressing the green key. The timer will not accept any
card numbers and can be reset to a new card number with the number card. (see section 5.1.1
“Setting the card number with the number card” on page 32).
•
The white key deletes all parameters. All master cards, operating time counters, time settings,
prices, Happy-Hour times etc. are reset to null or to the factory defaults. The card numbers
remain saved.
•
The red key exits the reset menu without deleting any data.
1.3.1 Servicing the EMS Timers
The EMS timers are largely maintenance free. High-quality components ensure a long life span.
In order to conform to the DIN EN 60335-2-27 and DIN V VDE 0801 safety regulations, all
components affecting the safety of the devices must be tested regularly, at least every 12
months. There is a special test program in the program environment for this purpose which is
accessed manually. The regular activation of the test program is the responsibility of the
operator. For information concerning the test program please refer to section 3
“Programming the EMS timers”, Sub-menu 6 Miscellaneous – Safety test.
Dirt and grime can collect in the coin validator and the chip card unit during normal timer
operation. If too much dirt has collected, normal operation can be disrupted. Cleaning the
affected components can solve the problem.
•
We can provide you with a special cleaning set for the chip card unit which allows you to
remove dirt and grime from the contact points. You can also help keep the chip card unit clean
by checking customer cards when charging and cleaning them if needed.
•
The coin validator can be removed and cleaned from an authorized specialist.