Beckmann EMS 133 E Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 38

Beckmann EMS 133 E Скачать руководство пользователя страница 36

Product Description & Operating Manual EMS 13x / 23x / 33x

Page 36

Beckmann GmbH © 2003

5.6 The customer cards

Customer cards can only be used for time vending. (see “Vending using a PIN-CARD” on page
14).

6 EMS timer accessories

The following accessories are available from your dealer for your EMS timers.

6.1 Solid wood side panel

Free–standing EMS timers receive an exclusive look through our solid wood side panel. When
several timers are mounted next to each other, panel the outer sides of the first and last timers to
give the entire installation a finished look. The side panels are simply glued onto the sides of the
timers. The following types of wood are available:

•

Beech

•

Oak

•

Walnut

•

Cherry

Additional wood types are available on request.

6.2 TV interface

The TV interface allows you to display the tanning device status overview (free, in use, tanning
xx min., cool down, cleaning etc.) on any TV with a RGB scart port. A display for 6,8,10,12 or 14
devices can be shown. The TV interface is connected to the timers through the EMSBUS (see
Illustration 1: on page 8).

6.3 Individual remote displays

A device’s operating status can be shown over an individual remote display, showing, for
example, a customer’s remaining time in the device. The display is connected to the timers
through the EMSBUS.

6.4 Modembox

A modembox can be integrated into a network of EMS timers, allowing remote data query as
well as remote timer programming. Furthermore, using a modem in conjunction with
Beckmann’s EMSCOM software allows you to manage and query data of up to 100 studios from
a remote office.

6.5 Handheld chipcard terminal

The handheld chipcard terminal is available in several models and features the following:

•

Convenient charging and editing of customer cards. Manage individual Happy-Hour settings,
serial numbers, purchases etc.

•

Monitored customer card charging through authorized employee

•

Receipt printer port for documenting card charging and purchases (requires version with
printer port)

•

Battery operation

«
...
34
35
36
37
38
»

Содержание EMS 133 E







































Отзывы:

Нет отзывов