Beckmann EMS 133 E Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 38

Beckmann EMS 133 E Скачать руководство пользователя страница 23

Product Description & Operating Manual EMS 13x / 23x / 33x

Beckmann GmbH © 2001

Page 23

3.

In operation [D]

Þ

This parameter allows one to put a timer out of operation if needed. After

exiting the programming environment, the display shows the following..

OUT OF SERVICE

and coins and customer cards are not accepted. Standard: YES.

4.

Automatic clear

[D]

Þ

If set to YES, the daily cash register parameters Cash daily (M1N1),

Tokens daily (M1N2), Card daily (M1N3), Customers daily (M1N5) and Charging daily
(M1N10) are automatically deleted at midnight. Please ensure that the clock is correctly set!
Standard: NO.

5.

Network node number

[C]

Þ

When using timers in a EMSBUS network, each timer must

have it’ own unique network node number. Standard: 1. The timer with the lowest network
node number is the master timer (M6N1) and as such, automatically switches additional timers
into Happy-Hour mode and back to normal mode.

6.

Big Time display [D]

Þ

when set to YES, the remaining time in minutes display shows large

numbers. Standard: NO. Set to whichever you prefer.

7.

Display contrast

[C]

Þ

Determines the display contrast. Please note that the display requires a

few seconds to update after setting a new contrast value.

8.

Second display

[D]

Þ

Allows you to set if the remaining time should be displayed to the

second, or to the tenth of the minute.

9.

Mastercode (EMS135 only) [C]

Þ

Programming environment access code–

see section

„EMS135 features“

10.

Cash register query (EMS135 only) [D]

Þ

Determines whether pressing the key to the right

on the cash drawer will result in register data being shown on the display. Standard: NO.

11.

Safety test

Þ

Pressing the green key starts a safety test as per DIN 60335-2-27/A11. After

pressing, follow the instructions on the display. To ensure problem-free timer operation, this
test must be done

at least every 12 months

. The timer will be automatically locked and put

out of service if an error occurs during the test or if the test fails. In this case, call the
authorized service specialists for your timer.

In case of a negative test result, the timer may

not be used further!

3.3 Using the EMS discount-system

There are two different ways of offering your customers rebates and discounts available, which
helps you win customer loyalty.
The Happy-Hour system provides your customers with lower rates during the Happy-Hour times
you have set for your timers. The Happy-Hour system can help you more evenly balance the
load over the day for your studio.
The rebate system gives lower rates to customers that buy longer tanning times.

«
...
21
22
23
24
25
...
»

Содержание EMS 133 E







































Отзывы:

Нет отзывов