manualshive.com logo in svg

Beckhoff EL33-00 Series, Документация

Поделиться
Скачать
Beckhoff EL33-00 Series Скачать руководство пользователя страница 131

Commissioning

EL33xx-00x0

131

Version: 4.2

Status

Description

No Carrier / Open

No carrier signal is available at the port, but the port
is open.

No Carrier / Closed

No carrier signal is available at the port, and the port
is closed.

Carrier / Open

A carrier signal is available at the port, and the port is
open.

Carrier / Closed

A carrier signal is available at the port, but the port is
closed.

File Access over EtherCAT

Download

With this button a file can be written to the EtherCAT
device.

Upload

With this button a file can be read from the EtherCAT
device.

"DC" tab (Distributed Clocks)

Fig. 150: "DC" tab (Distributed Clocks)

Operation Mode 

Options (optional):

• FreeRun

• SM-Synchron

• DC-Synchron (Input based)

• DC-Synchron

Advanced Settings… 

Advanced settings for readjustment of the real time determinant TwinCAT-
clock

Detailed information to Distributed Clocks are specified on 

http://infosys.beckhoff.com

:

Fieldbus Components

 → EtherCAT Terminals → EtherCAT System documentation → EtherCAT basics →

Distributed Clocks

5.2.7.1

Detailed description of Process Data tab

Sync Manager

Lists the configuration of the Sync Manager (SM).
If the EtherCAT device has a mailbox, SM0 is used for the mailbox output (MbxOut) and SM1 for the mailbox
input (MbxIn).
SM2 is used for the output process data (outputs) and SM3 (inputs) for the input process data.

If an input is selected, the corresponding PDO assignment is displayed in the 

PDO Assignment

 list below.

PDO Assignment

PDO assignment of the selected Sync Manager. All PDOs defined for this Sync Manager type are listed
here:

Содержание EL33-00 Series













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды