Mounting and wiring
EK9300
17
Version: 3.2.6
3
Mounting and wiring
3.1
Mounting
3.1.1
Instructions for ESD protection
NOTE
Destruction of the devices by electrostatic discharge possible!
The devices contain components at risk from electrostatic discharge caused by improper handling.
• Please ensure you are electrostatically discharged and avoid touching the contacts of the device directly.
• Avoid contact with highly insulating materials (synthetic fibers, plastic film etc.).
• Surroundings (working place, packaging and personnel) should by grounded probably, when handling
with the devices.
• Each assembly must be terminated at the right hand end with an
bus end cap, to en-
sure the protection class and ESD protection.
Fig. 11: Spring contacts of the Beckhoff I/O components
