manualshive.com logo in svg

Beckhoff EJ6910, Руководство по эксплуатации

Поделиться
Скачать
Beckhoff EJ6910 Скачать руководство пользователя страница 7

Foreword

EJ6910

7

Version: 1.7.0

1.2.3

Description of safety symbols

In these operating instructions the following symbols are used with an accompanying safety instruction or
note. The safety instructions must be read carefully and followed without fail!

DANGER

Serious risk of injury!

Failure

 to follow the safety instructions associated with this symbol directly endangers the

life and health of persons.

WARNING

Risk of injury!

Failure

 to follow the safety instructions associated with this symbol endangers the life and

health of persons.

CAUTION

Personal injuries!

Failure

 to follow the safety instructions associated with this symbol can lead to injuries to

persons.

Attention

Damage to the environment or devices

Failure

 to follow the instructions associated with this symbol can lead to damage to the en-

vironment or equipment.

Note

Tip or pointer

This symbol indicates information that contributes to better understanding.

Содержание EJ6910















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды