Beckhoff CX8190, Руководство пользователя

Страница: 13 / 72

Product overview
CX8190 13 Version: 1.5
4.1 Structure
1
2
7
4
8
10
11
12
14
3
13
15
5
6
9
10
Fig. 1: Sample configuration of a CX8190 Embedded PC.
Table 2: Legend for the configuration.
No. Component Description
1
DIP switch [
}
30] (S101).
You can set the IP address for the X101/X102 switched Ethernet
interfaces with the DIP switch.
2
Battery compartment
[
}
63] (under the front
flap).
Power supply for the battery-backed clock for time and date.
3
MicroSD card slot [
}
18]
(under the front flap).
Slot for industrial MicroSD cards.
4
Ethernet interfaces RJ45
[
} 15] (X101, X102).
For the connection to local networks. Realtime-Ethernet-capable.
5
Reset button [
}
18]
This switches the Embedded PC to Config mode.
6
Diagnostic LEDs [ } 59] .
Diagnostic LEDs. You can create your own diagnostic messages
for the WD and ERR diagnostic LEDs (see:
Control diagnostic
LEDs [
}
51] ).
7
Ethernet interface [ } 15]
(X001).
Interface for commissioning and programming the Embedded PC.
8
Diagnostic LEDs, power
supply terminal [
}
59] .
Diagnosis of the power supply for the Embedded PC and the
terminal bus. Status of the E-bus and K-bus communication.
9 Spring-loaded terminals,
+24 V and 0 V Power supply for Embedded PC.
10 Terminal bus (K-bus or E-
bus) Interface for EtherCAT Terminals or Bus Terminals. Data exchange
and supply.
11 Spring-loaded terminal,
+24 V Power supply for Bus Terminals via power contact.
12 Spring-loaded terminal, 0 V Power supply for Bus Terminals via power contact.
13 Terminal release Releases the power supply terminal and therefore the Embedded
PC from the mounting rail.
14 Spring-loaded terminal, PE Spring-loaded terminal for power contact PE.
15 Power contacts, +24 V,
0 V, PE Power contacts for Bus Terminals.
Also see about this
2
Setting with DIP switches [
}
30]