Beckhoff CP39-14-0010 Series, Руководство пользователя

Страница: 24 / 54

Commissioning
CP39xx-14xx-0010 24 Version: 1.1
4 Commissioning
Operating the Control Panel
The Control Panel is operated via the touch screen.
NOTE
Damage to the touch screen
Operating the touch screen with unsuitable objects may damage the touch screen.
• Operate the touch screen only with bare fingers or wearing suitable special gloves.
• If you use gloves, make sure that no hard particles such as metal shavings, glass splinters or similar ad-
here to the glove.
To use the Control Panel, you must first put it into operation. The first step is to transport the device to is
operating location and unpack it. This is followed by mounting the device in the required position, connecting
the cables and power supply, and finally switching on the Control Panel. Since the Control Panel does not
have its own power switch, switching the power supply on and off also switches the Control Panel on and off.
4.1 Transport and unpacking
Note the specified transport and storage conditions (see Chapter 8, Technical data [ } 49] )
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts. During
transport the device must therefore be protected from mechanical stress. Appropriate packaging of the
Control Panel, in particular the original packaging, can improve the vibration resistance during transport.
NOTE
Hardware damage due to condensation
Unfavorable weather conditions during transport can cause damage to the device.
• Protect the device against moisture (condensation) during transport in cold weather or in case of ex-
treme temperature fluctuations.
• Do not put the device into operation until it has slowly adjusted to the room temperature.
• Should condensation occur, wait for about 12 hours before switching the device on.
Unpacking
Proceed as follows to unpack the device:
1. Check the packaging for transport damage
2. Remove packaging.
3. Keep the packaging for possible future transport.
4. Check your delivery for completeness by comparing it with your order.
5. Check the contents for visible shipping damage.
6. In case of discrepancies between the package contents and the order, or in case of transport damage,
please inform Beckhoff Service (see Chapter 10.1 Support and Service [ } 51] )