Beckhoff CP32 Series, Инструкция по установке и эксплуатации

Страница: 8 / 34

Foreword
1.4 Operator’s obligation to exercise diligence
The operator must ensure that
•
the product is only used as intended (see chapter Product Description )
•
the product is in a sound condition and in working order during operation
•
the product is operated, maintained and repaired only by suitably qualified and authorized
personnel
•
the personnel is instructed regularly about relevant occupational safety and environmental
protection aspects, and is familiar with the operating manual and in particular the safety notes
contained herein
•
the operation manual is in good condition and complete, and always available for reference at the
location of the product.
Do not open the housing of the Panel PC!
Note
For technical support contact Beckhoff Service .
1.4.1 National regulations
Depending on the type of machine and plant in which the Industrial PC is used, national regulations
governing the controllers of such machines will apply, and must be observed by the operator. These
regulations cover, amongst other things, the intervals between inspections of the controller. The operator
must initiate such inspections in good time.
1.4.2 Procedure in the event of a fault
In the event of faults at the Industrial PC, the list in the section Troubleshooting can be used to determine
the measures to be taken.
1.4.3 Operator requirements
Anyone who uses the Industrial PC must have read these operating instructions and must be familiar with
all the functions of the software installed on the Industrial PC to which he has access.
6 CP32xx