Mounting
4.2 Mounting arm installation
The mounting arm adapter is designed for Rittal- and Rolec mounting arm systems with 48 mm tubes.
Depending on the order option C9900-M184 the mounting arm can be installed from the bottom:
Order Option
Description
C9900-M184
Mounting arm adapter for Panel PC CP32xx, for Rittal and Rolec mounting arm
systems with 48 mm tube from bottom instead of from top.
Tolerance of the mounting arm tube diameter
Note
The mounting arm tube must have a diameter of 48 mm with a maximum tolerance of
–0.1 mm/ +0.8 mm.
The mounting arm adapter enables to tilt the Panel PC at +/- 20° and to rotate it about +/- 165°.
Anti-twist protection
Note
The mounting arm adapter is fitted with an anti-twist safeguard to avoid over winding
the Panel PC and damaging the connecting cables.
Tightening the locating screw with star knob (
1
) will protect the Panel PC against distortion. The hook
wrench (
2
) and the 3 mm Allen key (
3
) are required for installation of the mounting arm tube at the
mounting arm adapter.
Order Number
Description
C9900-Z263
Hook wrench size 58 – 62 for tying up the slotted nut of the mounting arm adapter
C9900-M75x
1
3
2
CP32xx
17
