Beckhoff CP32 Series, Инструкция по установке и эксплуатации

Страница: 18 / 34

Mounting
4 Mounting
The assemblage of the Panel PC occurs by using the mounting arm adapter.
The ambient conditions specified for operation must be observed (see chapter Technical Data ).
Please note the following points during installation of the Panel PC:
•
Position the Panel PC in such a way that reflections on the screen are avoided as far as possible.
•
Use the position of the screen as a guide for the correct installation height; it should be optimally
visible for the user at all times.
•
The Panel PC should not be exposed to direct sunlight.
Avoid extreme environmental conditions
Attention
Extreme environmental conditions should be avoided as far as possible. Protect the
Panel PC from dust, moisture and heat.
4.1 Earthing measures
Earthing connections dissipate interference from external power supply cables, signal cables or cables to
peripheral equipment. Establish a low-impedance connection from the earthing point on the Panel PC
housing (see chapter
Ground connection ) to the central earthing point on the control cabinet wall, in
which the Panel PC is being installed.
Malfunction possible with missing ground connection
Note
A proper ground connection of the device is absolutely necessary for the correct
function of the touchscreen.
16 CP32xx