Beckhoff CP22 Series, Руководство пользователя

Страница: 6 / 53

For your safety
CP22xx 6 Version: 2.0
2 For your safety
The Safety chapter first explains the safety symbols used in the documentation and their meanings. They
contain fundamental safety instructions that are essential for the avoidance of personal injuries and damage
to property.
Exclusion of liability
Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the
devices outside the documented operating conditions.
2.1 Description of safety symbols
The following safety symbols are used in these operating instructions. In order to avoid personal injuries and
damage to property, read and follow the safety and warning notices.
Warning of personal injuries
DANGER
Disregarding the safety notice will lead to death or serious injuries.
WARNING
Disregarding the safety notice may lead to death or serious injuries.
CAUTION
Disregarding the safety notice may lead to minor injuries.
Warning of damage to property
NOTE
Disregarding the notice may lead to damage to property.
2.2 Intended use
The Panel PC is designed for installation in the front of a control cabinet and can be used in a variety of
ways in machine and system engineering.
The front of the Panel PC is designed for an IP65 working environment. It offers full protection against
contact and against dust, as well as protection against water jets (nozzle) from any angle.
The rear side is designed for a working environment that meets the IP20 protection rating. It is protected
against the penetration of fingers and solid foreign bodies of 12.5 mm in diameter or larger in size. It is not
protected against water. Operation of the device in wet and dusty environments is not permitted. The
specified limits for technical data must be adhered to.
The Panel PC can be used within the documented operating conditions.
Improper use
Do not use the device outside the documented operating conditions.
2.3 Fundamental safety instructions
The following safety instructions must be observed when handling the device.