manualshive.com logo in svg

Beckhoff CP22 Series, Руководство пользователя, Страница: 44 / 53

Поделиться
Скачать
Beckhoff CP22 Series Скачать руководство пользователя страница 44

Maintenance

CP22xx

44

Version: 2.0

7.2.3

Replacing the fan

NOTE

Incorrect fan type

The Panel PC may be damaged if the wrong type of fan is installed.

• Only replace the fan cartridges with cartridges from Beckhoff Service.

The fan cartridges ensure optimum cooling of the Panel PC. Order a new fan cartridge exclusively from
Beckhoff. To do this, contact Beckhoff Service (see Chapter 10.1 

Service and Support [

}

 48]

).

You can replace the fan cartridges while the PC is running. Insert the new cartridge immediately after
removing the old one.

To replace the fan cartridges, follow the steps below as shown in Figure 29:

1. Loosen each M4 screw of the fan cartridge (section A).

2. Fold the fan cartridges to the outside (section B).

3. Remove the fan cartridges (section C).

A

B

C

Fig. 29: CP22xx_fan replacement

4. Insert the new fan cartridges.

5. Fold the fan cartridges inwards.

6. Tighten the M4 screws.

ð

You have now replaced the fan cartridges.

Содержание CP22 Series






















































Отзывы:

Нет отзывов