Beckhoff CP22 Series, Руководство пользователя

Страница: 7 / 53

For your safety
CP22xx 7 Version: 2.0
Application conditions
• Never use the device in potentially explosive atmospheres.
• Do not carry out any work on the device while it is live. Always switch off the supply voltage for the
device before mounting it, replacing device components or rectifying malfunctions. This does not apply
to the replacement of hard disks and SSDs in a RAID configuration.
• Never connect the device during a thunderstorm. There is a risk of electric shock.
• Ensure that the device has a protective and functional earth connection.
Damage to property, loss of data and impairment of functions
• If you change the hardware and software configurations, you must keep within the specified limits of
power consumption and power loss (please refer to the respective data sheet).
• Ensure that only trained specialists with a control and automation engineering background, operate the
device. Use by unauthorized persons can lead to damage to property and loss of data.
• Fuse the power supply line to protect the supply line in the event of a short circuit according to its
cross-section.
• In case of fire, extinguish the device with powder or nitrogen.
2.4 Operator's obligation to exercise diligence
The operator must ensure that
• the products are only used as intended (see chapter 2.2 Intended use [
}
6] ).
• the products are only operated in sound condition and in working order.
• the products are operated only by suitably qualified and authorized personnel.
• the personnel is instructed regularly about relevant occupational safety and environmental protection
aspects, and is familiar with the operating instructions and in particular the safety instructions contained
herein.
• the operating instructions are in good condition and complete, and always available for reference at the
location where the products are used.