Becker TRAFFIC ASSIST PRO, Руководство по эксплуатации

Страница: 57 / 84

57
Navigational mode
If dynamic route guidance is active, a
continuous check is made for the
presence of relevant announcements for
the selected route (however, traffic
problems still appear on the map even
when route guidance is not active).
If these continuous checks determine
that a traffic announcement is relevant to
route guidance, the unit will
automatically recalculate a new route to
the destination (See “The TMC button”
on page 54.).
Displaying TMC messages on
the map
Current TMC messages are displayed on
the map in graphic form. Sections of the
route where there are problems with
traffic are highlighted green. A black
arrow also indicates the direction of
travel. In addition to the coloured mark,
a warning sign is displayed on the
stretch of road affected.
Using TMC
Once you have connected the TMC
antenna, your Traffic Assist Pro will
receive current traffic announcements
and dynamic route calculation will be
enabled (traffic jam diversion). You can
also view traffic announcements
directly.
To preset the TMC, See "The TMC
button" on page 54.
!
Press the map on the map display.
! Press the
TMC
button.
All current traffic announcements are
displayed.
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot as-
sume responsibility for the complete-
ness or accuracy of the announcements.
Austria:
The location and event code
was made available by ASFINAG and
BMVIT.
6071
6071
6071
6071