What to do if...?
Problem
Remedy
The door cannot be operated using the
transmitter.
Check the safety devices. The control unit
only reacts to the transmitter if all the
safety devices are active and the door
moves in maintained operation.
The LED (D) flashes when the transmitter
is operated. Press the radio PRG button
(A) until the LED (F) flashes green. Now
press the control button (G) on the trans-
mitter within 15 seconds.
The LED (D) does not flash when the
transmitter is operated. Program the
transmitter into the radio receiver.
Set the DIP switch (E) to OFF.
16
