Programming additional transmitters
In addition to the master transmitter, up to 7 further trans-
mitters can be programmed in the radio receiver.
Press the programming button (C) of the master transmitter for 3 seconds.
▻
The LED (D) lights up once to confirm.
Now press the programming button of a new transmitter which has not yet been pro-
grammed in the tubular drive for 3 seconds. This activates the programming mode of
the radio receiver for a new transmitter for 3 minutes.
▻
The LED (D) lights up once to confirm.
Now re-press the programming button of the new transmitter you wish to program for 3
seconds.
▻
The LED (D) lights up twice to confirm.
►
The new transmitter has now been programmed.
Deleting transmitters
Deleting individual transmitters
The programmed master transmitter cannot be deleted. It
can only be overwritten.
Press the programming button (C) on the master transmitter for 3 seconds.
▻
The LED (D) lights up once to confirm.
Now press the programming button of the transmitter to be deleted for 3 seconds.
▻
The LED (D) lights up once to confirm.
Then press the programming button of the transmitter to be deleted again for 10
seconds.
▻
The LED (D) lights up twice to confirm.
►
The transmitter has now been deleted from the radio receiver.
13
