Programming the remote control
Caution
If a radio control system is used, the person operating the
door must have full view of the door and its surroundings
while the door is moving and ensure that he/she is clear of
all hazardous areas.
It is only possible to operate the control unit with one
transmitter when a safety device is connected. A pro-
grammed transmitter is indicated by flashing of the LED
(D) on the radio receiver.
Operate the programming button on the transmitter using
a suitable cylindrical tool (e.g. a ballpoint pen).
Transmitters with a timer cannot be programmed. It is not
possible to program intermediate positions. Automatic
timer control functions are not executed via the transmit-
ter. A central command must be programmed into the con-
trol unit separately.
Programming the first transmitter (master transmitter)
Press the programming button on the radio receiver (B) for 3 seconds.
▻
The LED (D) flashes and the radio receiver goes into programming mode for 3
minutes.
Then press the programming button on the transmitter (C) for 3 seconds.
▻
The LED on the hand-held transmitter lights up for 3 seconds and the LED (D)
goes out.
►
Programming is thereby completed and the control unit switches back to the nor-
mal operating status.
Now close the cover of the control unit again using the four cover screws.
12
