General
These tubular drives are high-quality products with the following features:
PR+SMI
•
Ideal for use with roller shutters
•
Installation possible without stops (from lower point to upper point)
•
Simple to set the limit position by pressing a button on the programming unit
•
Automatic detection of limit positions thanks to intelligent electronic system with stop systems
∙
Secure anti-lifting device
∙
Slight pressure applied to the roller shutter curtain makes it difficult to raise or reach underneath
∙
suitable for rigid aluminium, steel and wooden profiles
•
Obstruction detection in down direction when using suspension springs and anti-lifting device
•
Blockage detection in upwards direction (e.g., end strip frozen to the window sill)
•
The limit positions do not have to be reset: Changes in the shading solution are accommodated automatically when using stop
systems.
•
Drive puts the roller shutter curtain under low tensile load
•
Considerably lower stop load, and thus considerably lower shading solution load.
•
Several drives can be operated in parallel
•
Suitable for all KNX/SMI actuators made by the drive manufacturer.
•
For plug-in connecting cable
PS(+)SMI
•
Optimised for sun protection applications
•
Installation without stops is possible (from extended point to retracted point)
•
Automatic detection of limit positions thanks to intelligent electronic system with stop systems
•
The limit positions do not have to be reset: Changes in the shading solution are accommodated automatically when using stop
systems.
•
Simple to set the limit position by pressing a button on the programming unit
•
Suitable for awnings, cassette awnings, screens, drop-arm awnings and conservatory shades. Type "+" drives are specially
designed for cassette awnings
•
Considerably lower stop load, and thus considerably lower shading solution load.
•
Several drives can be operated in parallel
•
Smooth operation of the system and the drive increases the service life
•
Suitable for all KNX/SMI actuators made by the drive manufacturer.
•
For plug-in connecting cable
Please observe these Assembly and Operating Instructions when installing and setting up the equipment.
The date of manufacture comes from the first four digits of the serial number.
The numbers 1 and 2 indicate the year and the numbers 3 and 4 indicate the calendar week.
Example: 24th calendar week in 2012
Ser. No.:
1224XXXXX
3
Содержание L120/11C PS(+)SMI
Страница 23: ...Declaration of conformity 23...
Страница 24: ......