Aug 2011, V 1.0
BECCA INC.
Instruction Manual S300A Spray Gun Cleaner
7
SAFETY AND WARNING (cont’
d)
UNIT USE AND CARE
° DO NOT FORCE THE UNIT.
It will perform better and safer at the rate for which it was designed.
°
THE USE OF ANY OTHER ACCESSORIES
not specified in this manual may create a hazard.
°
DISCONNECT THE UNIT
when not in use, before servicing.
°
DO NOT ALTER OR MISUSE THE UNIT.
These units are precision built. Any alteration or modification
not specified is misuse and may result in a dangerous situation.
Only trained repairmen should attempt (°) ALL REPAIRS, electrical or mechanical. Contact the nearest
BECCA repair service facility. Use only BECCA replacement parts, any other parts may create a
hazard.
SAFETY RULES
° THE OPERATOR MUST WEAR
protective solvent-proof rubber gloves to prevent contact between his
hands and the products used for cleaning.
° THE OPERATOR MUST WEAR
protective eyewear to prevent spatter from coming in contact with his
eyes.
°
THE SPRAY GUN CLEANER
is designed exclusively to wash spray guns and small objects.
°
STAY ALERT
at the start of the cleaning cycle. Make sure the solvent is not «corrosive». Immediately
stop washing and replace the solvent whenever you note signs of corrosion on the worktable.
°
IF EYES COME IN CONTACT WITH SOLVENTS
rinse thoroughly with water.
°
BEFORE USING
the Spray Gun Cleaner, make sure that all safety devices are in perfect operating
condition.
°
BECOME FAMILIAR WITH THE CONTROLS
and their functions before commencing work.
°
USE GROUNDABLE CONTAINERS (Containers, solvents are supplied in, are recommended)
for
the collection of solvents.
°
BE CAREFUL
when you load or unload the solvent in the unit. Make sure you do not splash or spill
the contents on the workshop floor.
°
THE OPERATOR MUST PERIODICALLY
check the level of the dirty solvent contained in the
collection pail to prevent it from overflowing.
