Aug 2011, V 1.0
BECCA INC.
Instruction Manual S300A Spray Gun Cleaner
9
INTRODUCTION
This Instruction Manual provides installation, operation and maintenance instructions for the ENVIRO 300
Spray Gun Cleaner unit, which shall be referred to as Spray Gun Cleaners in the following pages. Spray
Gun Cleaners are totally pneumatic units designed for Manual & Hands-Free cleaning of spray guns and
small parts.
It is very practical, time saving and economic for cleaning Spray Guns and small parts. The unit is
supplied with a pneumatic pump that pulls solvent from the container below in the cabinet. The solvent
that you will use will depend on the type of paint that you are using. The manufacturer of the paint will
give you the information you need regarding this.
The units supplied with the optional fume extractor, fumes are automatically sucked each time the
operator disengages the POWER CLEAN valve and opens the door to the unit. Vapors are sucked
through the vapor chimney that you will connect to the outside as per local regulations. You have the
option of placing an active carbon filter (part #824451). This filter can be installed onto the vapor exhaust
duct, which retains contaminating fumes.
This manual is an integral part of the product. It must be properly stored, kept in good condition and
available for consultation at any time during the entire working life of the Spray Gun Cleaner. Proper
washer operation, economy and durability depend on common sense and compliance with the instructions
given in this manual.
OPERATION GUIDELINES
Read the following sections carefully. They will help you use your Spray Gun Cleaner correctly
and help you select the correct function for your task.
Description of the valves
-
a:
Flow Brush Valve
-
b:
Wash Basin Valve
-
c:
POWER CLEAN Valve
-
d:
Wash Basin Security Valve
\Description for using the Spray Gun Cleaner unit
The first step in learning to use the Spray Gun Cleaner is to become familiar with the unit. The cleaner
basically consists of one (1) pump and one (1) container. Operations are carried out via the controls
placed on the top front panel which the operator can control the use.
a
–
The “Manual Flow Brush” valve allows you to operate the Manual Flow Bru
sh. When engaged
the pump will pull solvent through the Filtration System and clean the solvent before discharged.
