Bebecar Spinner 0986, Инструкция по эксплуатации

Страница: 14 / 32

ENGLISH
Forward Facing Mode -
for Child between 9-18kg / 1 - 4 years old
Securing your Child in the Child Restraint Forward Facing
NOTE:
NOTE:
NOTE:
Recline Adjustment
NOTE:
Height Adjustment for Headrest and Shoulder Harnesses
Detach Soft upholstery
Reference age: 1-4 years old
Recline position: Position 2
You can adjust child seat to upright or reclined when installing for
children weighting 9-18 kg.
Please install the child restraint on the vehicle seat, then put the
child in the child restraint.
If the child restraint in backward position, pull the child restraint
reclining wrench up while squeezing the child restraint recline
release button (Fig. 25), adjust child restraint to the most vertical
position, then squeeze child restraint rotate release button and
turn to forward position (Fig. 24), you can hear a “click” sound.
When installing the child restraint for forward facing, do
not use the small child insert.
After the child is placed into the child restraint, check
whether the shoulder harnesses are at proper height.
• Squeeze the webbing adjuster, while pulling out the shoulder
harnesses to the proper length (Fig. 15).
• Press the red button to disengage the buckle (Fig. 16).
• Leave the harnesses on the left side and right side of the seat
(Fig. 21).
• Place the child into the child restraint and engage the buckle
(Fig. 22).
After the child is seated, recheck whether the shoulder
harnesses are at the proper height.
• Engage the buckle.
• Pull down the adjustment webbing and adjust it to the proper
length to make sure your child is snugly secured (Fig. 22).
Make sure the space between the child and the
shoulder harness is about the thickness of one hand.
Press the recline adjustment button (Fig. 23.1) and adjust the
child restraint to the proper position (Fig. 23.2).
The recline angles are shown as (Fig. 24)
Please recheck the support leg position after reclining.
• Please adjust the headrest and check if the shoulder harnesses
are at the correct height according to (Fig. 20 and Fig. 22).
• Pull the headrest adjuster (Fig. 28.1) up, meanwhile pull up or
push down the headrest. The headrest positions are shown as
(Fig. 28).
• Press the red button to disengage the buckle (Fig. 16).
• Remove the small inner pads and crotch strap.
• Detach the elastic band (Fig. 29) on the headrest, and then
remove the cover.
• Detach the snaps on the seat pad, pull the buckle to the back of
seat pad, and then remove the seat pad (Fig. 30).
• To assemble soft upholstery in reverse steps.
ISOFIX