Beam IsatDock DRIVE, Руководство пользователя

Страница: 25 / 32

IsatDock DRIVE - Installation & User Manual 25
IsatDock DRIVE Front Panel
Location Button
Mode
Action LED/Sound
Mute Press
on/off
In a Call:
Mute the microphone (uplink) on the privacy handset
(optional accessory) if connected to cradle.
LED turns RED - Muted
LED turns OFF - Not muted
OR
Up/Down In a Call:
Increase/decrease volume on the external speaker or privacy
handset (optional accessory) if connected to cradle.
Audio will sound louder/quieter in privacy handset with each press.
Out of Call:
Increase/decrease volume of incoming ring tone on the external
speaker.
A beep will sound indicating the increased/decreased ring tone volume.
Single Press
(1 second)
In Tracking Mode*:
Send a tracking message to the pre-configured destination
A beep will sound to indicate that a tracking message is to be sent
#
Single Press
(7 seconds)
In Alert/Emergency Mode*:
Clear the alert/emergency mode and return to the
Tracking mode*.
LED changes from RED/YELLOW (solid or flashing) to GREEN
#
+
Two button
press
(2 seconds)
In Tracking Mode*:
Activate the Alert/Emergency mode.
A beep will sound indicating alert/emergency mode is activated
#
LED changes from GREEN to solid RED.
LED changes to flashing RED once the alert has been sent.
LED will change to slow flashing YELLOW once the remote server has
acknowledged receiving the alert.
+
Brightness
dual button
simultaneous
press
Out of Call:
Enter LED brightness change mode. Press UP and DOWN
arrows to vary intensity. Mode will automatically exit after 5
seconds after the last button press.
All LED’s will change to WHITE and a single beep will sound when entering
brightness change mode.
A short double beep will sound when exiting change mode.
* This action is optional, only when the Tracking Mode for your IsatDock DRIVE is configured and activated.
#
A beep will only sound if audible alerts are enabled in the Falcon