Beam IsatDock DRIVE, Руководство пользователя

Страница: 23 / 32

IsatDock DRIVE - Installation & User Manual 23
Hands-Free Phone Call – Mobile Terminating
Make a call from your landline phone or mobile
phone to the IsatPhone Pro handset. You need
to know the phone number of the SIM card
used in the IsatPhone Pro handset.
1.
The IsatDock DRIVE external speaker will
ring according to the ringer setting of
the IsatPhone Pro.
2. Answer the call by pressing the GREEN key
on the IsatPhone Pro handset.
Once the call is in progress, options A and
B from “Hands-free Phone Call – Mobile
Originating” section are also applicable.
Privacy Handset Use
(Optional Accessory)
Privacy handset Phone Call - Mobile
Originating
1. Remove the privacy handset from its cup
2. Dial using the full Inmarsat dialing
sequence eg. 00 country code and
telephone number on the IsatPhone Pro
keypad whilst docked. Press the GREEN
button to start the connection.
3. A message is displayed on the IsatPhone
Pro to indicate a call is in progress.
4. Once the call is connected, the STATUS LED
will flash to indicate a call is in progress.
following operating systems:
Windows XP (SP3 or above) & Windows Vista
7
You can download the Windows driver for the
IsatDock from
http://www.beamcommunications.com/
support/drive
5. Press the RED key on the IsatPhone Pro
handset to terminate the call.
Privacy Handset Phone Call - Mobile
Terminating
1. Answer the incoming call by un-cupping
the privacy handset from its cup.
2. Press the RED key on the IsatPhone Pro
handset or return the privacy handset to
its cup to terminate the call.
Mute Mode
Mute functionality
The mute function of the IsatDock DRIVE allows
the user to mute the uplink microphone audio
on the privacy handset and/or external hands-
free microphone.
1.
During a call, Press the Mute button on the
face of the IsatDock DRIVE, a RED LED will
illuminate the Mute button to confirm that
the IsatDock DRIVE is muted.
2. To exit the mute mode, press the mute
button once.
USB Driver Installation
The IsatDock DRIVE USB data port requires
an interface driver to be installed on the
user’s computer prior to undertaking data
communication. This driver supports the