Beam IsatDock DRIVE, Руководство пользователя

Страница: 22 / 32

22
Operation of the IsatPhone Pro
Prepare the Inmarsat IsatPhone Pro
Ensure that the IsatPhone Pro Handset has the
latest compatible firmware installed. For more
information visit:
www.beamcommunications.com/support/
drive
Starting Up
1. Retract the antenna on the IsatPhone
Pro handset.
2. Place the IsatPhone Pro as per instructions
“Docking & Undocking” on page 21.
3. Turn vehicle ignition on. The IsatPhone
Pro will automatically power and the
handset will then start to initialise followed
by a 3 tone rising beep when a successful
connection has been made between the
docking station and the IsatPhone Pro.
4. Wait for the IsatPhone Pro handset to register
on the Inmarsat network. The STATUS LED on
the docking station will turn green when a
successful registration has taken place.
5. You are now ready to make and receive calls.
battery whilst docked. If the battery temperature
exceeds this limit, then the IsatPhone Pro may
cease charging until the temperature is reduced.
Placing Voice Calls
Bluetooth ® calls via IsatPhone Pro
The IsatDock DRIVE allows for Bluetooth audio
calls to be placed via the IsatPhone Pro handset
while docked. Consult the IsatPhone Pro manual
for further information on pairing and Bluetooth
discovery setup.
Hands-Free Phone Call – Mobile Originating
1. Dial the number (using the full country
codes) on the IsatPhone Pro handset
keypad whilst docked. Press the GREEN
key to start the connection.
2. A message will display on the IsatPhone Pro
handset to indicate the call is progressing.
Options:
A.
During the call, you may transfer the call
to the optional privacy handset by taking
the privacy handset out of its cup. This
automatically directs the call audio to the
privacy handset.
B. To return the call back to hands-free mode,
place the privacy handset back in its cup.
NOTE:
1) If the IsatPhone Pro is removed from the dock
during a call, the call will drop out during this
transition.
2) One common cause for connection failure is
a flat IsatPhone Pro battery which prevents the
IsatPhone from turning ON. In these instances
the docking station will attempt to charge the
IsatPhone Pro handset while it is switched OFF,
until enough charge is present for the IsatPhone
Pro to turn ON. This charging period can take up
to 20 minutes depending on how flat the battery.
Pro handset
The IsatDock DRIVE provides charging power to
the IsatPhone Pro handset via its USB connector.
The IsatPhone Pro battery is a lithium-ion cell
which has a safety temperature range whilst
charging. This range is from 0 to 45 degrees
Celsius (32 to 113 degrees Fahrenheit).
Due to the increased heating effects on the
IsatPhone Pro handset whilst it is docked
and being charged, it is ideal for the ambient
temperature to be at least 18 degrees below the
45
o
C upper limit for the handset to charge the