BeaconMedaes AGS 1560, Инструкция

Страница: 8 / 48

Also consult following safety precautions: Safety precautions during Installation and Safety
precautions during Maintenance or Repair .
These precautions apply to vacuum pumps.
For precautions applying to the connected equipment consult the relevant instruction book.
Some precautions are general and cover several machine types and equipment; hence some
statements may not apply to your device.
1.4 Safety precautions during maintenance or repair
All responsibility for any damage or injury resulting from neglecting these precautions, or non-
observance of the normal caution and care required for installation, operation, maintenance and
repair, even if not expressly stated, will be disclaimed by the manufacturer.
General precautions
1. The operator must employ safe working practices and observe all related local work safety requirements
and regulations.
2. If any of the following statements does not comply with local legislation, the stricter of the two shall apply.
3. Installation, operation, maintenance and repair work must only be performed by authorised, trained,
specialised personnel.
4. Before carrying out any maintenance, repair work, adjustment or any other non-routine checks, stop the
device. In addition, the power isolating switch must be opened and locked.
Precautions during maintenance or repair
1. Use only the correct tools for maintenance and repair work.
2. Use only genuine spare parts.
3. A warning sign bearing a legend such as "Work in progress - do not start" shall be attached to the starting
equipment, including all remote start equipment.
4. Persons switching on remotely controlled machines shall take adequate precautions to ensure that there
is no one checking or working on the machine. To this end, a suitable notice shall be affixed to the remote
start equipment.
5. Never use flammable solvents or carbon tetrachloride for cleaning parts. Take safety precautions against
toxic vapours of cleaning liquids.
6. Scrupulously observe cleanliness during maintenance and repair. Keep dirt away by covering the parts
and exposed openings with a clean cloth, paper or tape.
7. Never use a light source with open flame for inspecting the interior of the device.
8. All regulating and safety devices shall be maintained with due care to ensure that they function properly.
They may not be put out of action.
9. Before clearing the device for use after maintenance or repair, check that operating pressures, temperatures
and time settings are correct. Check that all control and shut-down devices are fitted and that they function
correctly.
Instruction book
6