Seite 27 von 33
NOTE
This function distributes the discharged air to the left and right. This way you achieve
a horizontal air distribution in the room.
UVB steriliser
Use
the
- button on the remote control
or the "
UVB
"
button on the unit to activate
the UVB sterilisation function of the unit,
the respective indicator lights up.
As soon as you activate the UVB-button, the speed of the fan changes automatically
to the lowest fan level until you deactivate the function.
Press the button again to deactivate the function.
NOTE
This function disinfects the drawn-in air inside the unit and cleans it for discharge
from the unit.
NOTE
The UVB-lamp switches off automatically after 8 hours, unless you switch it off
earlier.
Ozone cleaning
ATTENTION PLEASE OBSERVE THE WARNINGS ON OZONE VERY CAREFULLY!
1. While the unit is switched on, press the
- button on the remote control or the
"OZONE" button on the unit for 3 seconds to start ozone purification.
2. After pressing once, a duration of 15 minutes is set as standard. Each subsequent
press of the button increases the cleaning time with ozone by another 15 minutes. The
maximum cleaning time is 120 minutes.
a.
(EXAMPLE: 15 min. - 30 min. - 45 min. - 60 min. - 75 min. - 90 min. - 105
min. - 120 min.)
3. As soon as you activate the OZON-button, the speed of the fan changes automatically
to the lowest fan level.
4. Choose the ideal cleaning time with ozone depending on the room size:
Room area
Recommended treatment time
7,5 m²
15 minutes
15 m²
30 minutes
22,5 m²
45 minutes
30 m²
60 minutes
37,5 m²
75 minutes
45 m²
90 minutes
52,5 m²
105 minutes
60 m²
120 minutes
5. To deactivate the cleaning function with ozone, press the
- button repeatedly until
you reach 120 min. and then press it again.
(EXAMPLE: 15 min - 30 min - 45 min - 60 min - 75 min - 90 min - 105 min - 120 min
OFF)
