Seite 25 von 33
COMMISSIONING
PREPARATION FOR USE
IMPORTANT!
Read the safety instructions very carefully.
Especially when using the ozone cleaning mode, you must follow all instructions carefully.
Place the unit on a level surface with a properly earthed socket.
The BE COOL air purifier has a motion sensor that stops the ozone function as soon as
the room is entered. In order for it to be able to perceive the surroundings optimally, it is
recommended to point the unit with the front and a maximum distance of 6 metres in the
direction of the door.
Before using the unit, make sure that both air inlet and air outlet are free of obstructions
and not blocked.
Observe the instructions in the chapter "Important information on safety, location and
electrical connection".
EXPLANATION OF FUNCTION
Ozone
ATTENTION - PLEASE OBSERVE THE WARNINGS ON OZONE VERY CAREFULLY!
Ozone is a very strong oxidant which oxidatively breaks down and destroys existing molecules.
It thus has the ability to eliminate bacteria, viruses, gases, toxins and unpleasant odours and
render pathogens harmless.
Explanation:
An oxygen (O2) molecule is split by high voltage into two oxygen atoms (O), these form a
bond with the oxygen molecules (O2) in the air and thus become ozone (O3). However, the
ozone molecule is extremely unstable and strives to give up one oxygen atom.
The ozone molecule (O3) releases a single oxygen atom (O), which destroys odour
molecules and other substances through oxidation.
Anion
The air purifier is equipped with an "ioniser". This distributes ionised air into rooms and
removes static charge. In addition, the atoms and molecules created promote the chemical
decomposition process and can thus be used to eliminate odours and disinfect the air.
UVB steriliser
The air purifier is equipped with a "UVB light diode". This ultraviolet light is able to destroy
bacteria, viruses and germs.
