Be Cool BC10MBKL2101F, Руководство оператора

Страница: 50 / 72

The cooling function allows the air conditioner to cool the room and at
the same time reduces air humidity. The desired temperature can be
COOLING
adjusted using the increase and decrease button between 16°C and 30°C.
The fan speed can also be adjusted using the speed button.
Dry mode will extract moisture from the air, which will be drained
outside using the installed drain pipe. the fan speed and the desired
DRY temperature cannot be adjusted in dry mode.
In fan mode the appliance will recirculate the air within the room,
MODE
and will not cool, heat or dehumidify. The fan speed can be adjusted
FAN using the Speed button, But the desired temperature can not be set.
The heating function allows the air conditioner to heat the room.The
desired temperature can be adjusted using the increase and decrease
HEATING
button between 16°C and 30°C. The fan speed can also be adjusted
using the speed button.
Silent mode can be activated from APP or the remote control, It can
SILENT
also be activated by pressing " "+" " on unit control panel at the
same time. It will only operate in cooling or heating modes, the fan
speed will change to low and noise will be lower.
Press to change the fan speed between Low, Medium and High. The
VITESSE DU
fan speed cannot be adjusted in Dry or Silent modes.
VENTILATEUR
The air conditioner contains a 24 hour timer, which can be used to either set a
delayed start, or a set period of operation.
SHUTDOWN TIMER:
While the unit is running press the timer button, the display will flash “0” 5 times,
then press the up and down buttons to adjust the duration in 1 hour increments
TIMER
between 1 to 24 hours. When the timer has elapsed, the unit will shutdown
automatically.
DELAYED START TIMER:
With the unit in standby, press the timer button, the display will flash “0” 5 times.
then press the up and down buttons to adjust the duration in 1 hour increments
between 1 to 24 hours. After the timer has elapsed, the unit will start up in the
same mode with the same settings as when it was turned off.