BDDF00122 Issue 3
15/36
Alaris™ Gateway Workstation v1.3.x
Features of the Workstation
Infusion Line Tidies (where fitted)
To assist in the routing of infusion sets and syringe extension sets from the Pumps to the patient, line tidies can be attached to the rear of
the Workstation . The infusion line tidies are height adjustable allowing positioning adjacent to both syringe and volumetric Pumps, and
may be mounted on the left or right hand side of the Workstation . To use the infusion line tidies:
1 . Loosen the hand wheel and adjust to the desired position .
2 . Hand tighten the hand wheel to secure the device .
3 . Refit rubber strip .
Note:
It is recommended that line tidies be used to organize the infusion lines, this could reduce the
risk of tangled infusion lines and tripping the user or patient .
Alaris Trolley
When the Workstation is mounted to the Alaris Trolley and is not being transported, the brakes should be engaged .
To operate the Alaris Trolley brakes:
1 . Locate brake mechanism at the end of the wheels .
2 . Press down to engage the brakes .
3 . Pull up to disengage the brakes .
Warning: All wheels that have brakes should be set to the same engaged or disengaged state.
Prior to moving the Alaris Trolley all brakes should be disengaged.
Bottom up view, showing 4 locking casters:
New Alaris Trolleys shipped with Workstation of version 1.3.x or higher are equipped with 4 locking casters.
