19 November 2008
BD X-Monitor 2 #
1080500
29
BD Engine Brake Inc
A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Ship: #88 – 446 Harrison St, Sumas, WA 98295 Mail: PO Box 231, Sumas, WA 98295
Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com
Display Functions
The X2 has 4 buttons for control. The buttons have a reference on the display screen for
ease of use.
The top button is the
Menu/Escape
button. This button can be used to enter the Main
Menu anytime you have the X2 in the monitoring mode. Simply press the top button once
and you will enter the Main Menu.
The top button is also the Escape (back) button. Once you are in the main menu you can
press the top button again to go back to the main display. While in any other menu, this
button will bring you back one menu level. You can use this button to completely escape
from the menus if you desire.
The 2
nd
and 3
rd
buttons are used to move up and down in the menus. You may also hold
a button to scroll rapidly through any menu. These buttons are also used for adjusting
power levels up and down if the X2 is connected to a module/chip.
The bottom button is the
Select
button. Use this button to choose your options in the
menu. This button will advance you to the next menu or screen.
The X2 uses a highlighted cursor so that you can easily navigate the menu. The selection
that the cursor is over will be in black and the numbers/letters will appear in white.
The X2 defaults to a 4-function display upon initial startup. EGT/Boost PSI/ Transmission
Temp and Coolant Temp will be displayed. The power level will be defaulted at 0. De-
fueling and all warnings will be turned to the off position.
Main Menu
To get to the main menu, press the top or menu button one time. You will see the
following menu:
