English 32
Other Information
Problem
POSSIBLE SOLUTIONS
The recording function
does not work.
Check that a USB device is connected.
Check that the channel is a recordable digital channel.
If the signal is weak or does not exist, the recording function will automatically
be closed.
Since the function record temporary the program onto a hard disk only. Please
connect a hard disk which its storage capacity is no less than 8G.
The TV will not record if the USB device has no free memory space. Check
that this is not the case.
T.Shift Mode does not
work
Check that a USB device is connected.
Radio channels and analogue broadcasts are not supported.
Data broadcast channels are not supported.
If the signal is weak or does not exist, the T.Shift Mode function will
automatically be closed.
Since the function record temporary the program onto a hard disk only. Please
connect a hard disk which its storage capacity is no less than 8G.
T.Shift Mode can’t be performed if the USB device has no free memory
space. Check that this is not the case.
Others
The picture will not
display in full screen.
Channels will have black bars on either side of the screen when displaying
up scaled SD (4:3) contents.
Black bars on the top and bottom will appear during movies that have aspect
ratios different from your TV.
Adjust the picture size options on your external device or press the [SIZE]
button to 16:9 that will display the whole screen.
The remote control does
not work.
Replace the remote control batteries with the poles (+/–) in the right
direction.
Clean the transmission window located on the top of the remote control.
Pairing the Remote Control with TV. Not for TV models which use infrared
remote control.
Try pointing the remote directly at the TV from 5~6 feet away.
There is a plastic smell
from the TV.
This smell is normal and will dissipate over time.
TV is tilted to the right
or left side/front or back
side.
Remove the stand base from the TV and reassemble it.
There are difficulties
assembling the stand
base.
Make sure the TV is placed on a flat surface. It is necessary to use
magnetized screw driver if you cannot remove the screws from the TV.
The Channel menu can
not be selected.
The Channel menu is only available when the TV source is TV.
Your settings are lost after
every time the TV is turned
off.
If the TV is in the Retail Mode, your settings will not be saved. You should
select the Home Mode or Premium Mode.
You have intermittent loss
of audio or video.
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables.
Make sure the cables are flexible enough for long term use.
