English 10
To turn your TV on or off (standby mode):
1. Plug the AC power cord into a socket outlet of AC power supply.
2.
Switch on the
I/O
Power switch at the bottom of the TV to turn on/off your TV.
3. When the TV is powered on, press the [
POWER
] button on the remote control, it goes into standby mode.
Press the [
POWER
] button again to turn on your TV.
1.1
Turning your TV on or off
NOTES
When your TV is in standby mode, it is still consuming power. To completely disconnect power, please
remove the mains plug from the mains socket or switch off the
I/O
Power switch.
If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [
SETTING
] button on the remote, the list of Source
appears.
2.
Press the [
▲/
▲
] buttons to select the input source
.
3. Press the [
OK
] button to confirm your selection.
1.2
Selecting the Input Source
Shortcuts Instructions
You can use shortcuts on the remote control for fast operation. Refer to the “ Quick Setup Guide ” for more
information.
1.3
Live TV
Channel search guide
After you enter into Live TV channel, the terminal detects the presence of the channel list information (station
search has been completed). If you do not complete the scan, the user is prompted to start search. Press the
jump button, you can directly enter the settings/channel search interface.
Launch Live TV
If you are first used, the screen will display Live TV operating tips, including: how to start the channel list, how
to start the PVR / T.Shift, how to start channel info and so on.
OK
Call out Channel List
Call out PVR/T.Shift
View channel info
PRE-CH
View channel Info
Call out Channel List
Call out PVR/T.Shift
PRE-CH
