TX1000 Manual V8 September 2013
4
Tx1000 Telemetry Transmitter – Introduction
The Tx1000 is a simple to use telemetry transmitter for multi-camera CCTV systems. They are easily
installed into either a new or an existing system.
Up-the-coax telemetry allows upgrading of static cameras to PTZ without the need for additional cabling.
BBV RS422 telemetry is available as standard where up-the-coax telemetry is not suitable or not required.
An optional 20mA twisted pair unit (Tx/MK2/TPO) can be retro-fitted to the Tx1000 for complete compatibility
with existing Tx1000 sites.
The system is available in 8 variants:
Part Number
Description
Tx1000/8
Telemetry transmitter for 8 cameras with 2 monitor outputs, with joystick Keypad
Tx1000/8A
Telemetry transmitter for 8 cameras with 2 monitor outputs, 16 alarm input card and
joystick Keypad
Tx1000/8/MU
Telemetry transmitter for 8 cameras with 2 monitor outputs, no Keypad
Tx1000/8A/MU
Telemetry transmitter for 8 cameras with 2 monitor outputs, 16 alarm input card, and
no Keypad
Tx1000/16
Telemetry transmitter for 16 cameras with 2 monitor outputs, with joystick Keypad
Tx1000/16A
Telemetry transmitter for 16 cameras with 2 monitor outputs, 16 alarm input card and
joystick Keypad
Tx1000/16/MU
Telemetry transmitter for 16 cameras with 2 monitor outputs, no Keypad
Tx1000/16A/MU
Telemetry transmitter for 16 cameras with 2 monitor outputs, 16 alarm input card,
and no Keypad
All variants allow the use of two fully independent keypads.
The transmitter is a two part design: the base unit, which is wall or rack mounting; and the keypad which is
connected by a video cable and a bi-directional RS232 link running at 9600 baud, No parity, 8 data bits and
1 stop bit.
